Agricultural
What is the VeeConnect?
The VeeConnect is a 12 channel digital switching module, enabling the control of onboard switches through one sleek, slimline screen. The VeeConnect integrates every day electronics, ready for use at just the touch of a screen.
With a robust solid state design based on an aerospace pedigree, this technology allows for efficient builder configuration and reduced system and installation costs.
Flexible, Controllable & Customisable
Each of the VeeConnect’s 12 modules are configurable including options such as fuse rating, analogue or digital inputs, switch type (slider, on/off, burst) as well as having a library of predefined icons and switch descriptions available.
The diagram below illustrates a variety of switches that can be controlled using the VeeConnect.
VeeConnect Features:
- 12 channels: are capable of 20 Amps each, support PWM for lighting and can reverse analogue or digital inputs
- NMEA2000 Compatible
- IP67 All Around Protection
- Robust Solid State Design
Display Features:
- NMEA2000 Connected
- IP67 All Round Protection
- 5″ or 7″ Slimline Options
- Fully Sunlight Readable
- Touch and Swipe Functions
- Easy to Configure Interface
| Electrical | |
| Power Requirements | 10V to 32V DC |
| Connection |
1 x NMEA2000 M12 3 x Analogue Input Support 1 x 24 PIN GP10 |
| Input / Output | |
| Analogue Input |
12 x Analogue Input Support 0 – 28V input (< 100 Hz) |
| Digital Input | 12 x Digital Inputs (open collector) |
| Outputs |
12 x Circuit Breaker Outputs (20 Amp max) – 3 capable of reverse current blocking – all channels capable of PWM – 2 pairs polarity reversible |
| Environmental | |
| Operating temperature | -30°C to +70°C |
| Storage Temperature | -40°C to +85°C |
| Degree of Protection | IP67 |
| Ignition Protection | ISO 8846:1990 |
| Mechanical | |
| Case material | ABS |
| Case colour | Anthracite Grey |
| Dimensions | 315mm (W) x 53 mm (H) x 210mm (L) |
| Part Number | |
| 6001 | VeeConnect Switching Module |
| 5000 | T5 5″ Display |
| 7011 | T7i 7″ Display |
| Hardware | |
| CPU | Freescale iMX 6 800Mhz and additional Graphics Processor |
| FLASH Memory | 512 MB SLC NAND |
| SDRAM | 256 MB DDR3 |
| Electrical |
|
| Display | PCAP LCD 5.0″ / 7.0″ (T7i) |
| Resolution | 800 (H) x 480 (V) WVGA |
| Active Area | 108.0mm (H) x 64.8mm (v) / 152.4mm (H) x 91.44mm (V) (T7i) |
| Viewing Angle | 70 degrees left/right/down/up |
| Contrast Ratio | 700:1 / 600:1 (T7i) |
| Brightness | 1000 / 800 (T7i) NIT (cd/m2) Full Sunlight Readable |
| Power Requirements | 8V to 32V DC |
| Sounder | Internal Buzzer |
| Connection | 5 x M12 Connectors |
| Environmental | |
| Operating temperature | -20°C to +70°C / -30°C to +80°C (T7i) |
| Storage Temperature | -40°C to +80°C / -30°C to +80°C |
| Degree of Protection | IP67 |
| Mechanical | |
| Case material | ABS |
| Case colour | Anthracite Grey |
| Dimensions | 133mm (W) x 94 mm (H) x 11mm forward and 48mm rear (D) / 181.1mm (W) x 124mm (H) x 11mm forward and 56.4mm rear (D) (T7i) |
| Part Number | |
| 5000 | T5 5″ CAN Display |
| 7010 | T7i 7″ CAN Display |
Download the data sheet by clicking the button below.
VeeConnect Datasheet USA & Canada
VeeConnect Datasheet International
